Makita 18V X2 (36V) LXT Brushless 9 in. Power Cutter Kit, 4 Batteries (5.0 Ah) w/18V LXT Grinder and 9 in. Diamond Blade
About This Product
The 18V X2 (36V) LXT Brushless 9″ Power Cutter Kit (XEC01PT1) has the power to cut through various materials with all the benefits and convenience of cordless operation. The XEC01PT1 has a maximum cutting depth of 3-1/2″, thus can cut through standard residential concrete slab in a single pass. Besides concrete, it has the power to cut through I-beams, steel pipe (3″), rebar (3/4″ -#6), metal stud (14″ wide) and more. The benefits of a cordless power cutter over a gas power cutter include no oil/gas mixing, no emissions, no pull starts, no engine maintenance, and lighter weight. This means reduced operator fatigue, instant starts, cost savings, and the ability to use the power cutter indoors, in tight spaces, and high elevations. An integrated water delivery system continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications. Water flow is controlled with an adjustment knob. The belt-drive design provides smoother operation with lower vibration. The XEC01PT1 has a purpose-built BL Brushless Motor, which eliminates carbon brushes and enables the motor to run cooler and more efficiently for longer life. The brushless motor delivers 6,600 RPM. This Promotion also comes with a bonus XAG04Z 18-Volt LXT Lithium-Ion Brushless Cordless 4-1/2 in./5 in. Cut-Off/Angle Grinder (Tool-Only) and E-02973 9 in. Ultra-Premium Plus Diamond Blade, Segmented, General Purpose.
Highlights
- XEC01PT1 – Eliminates the hassles of gas with lower weight, reduced maintenance, and zero emissions allowing use in indoor environments
- XEC01PT1 – The BL Brushless Motor powered by two 18V LXT Lithium-Ion batteries eliminate the hassle of engine pull starts allowing immediate starts-up (batteries not included)
- XEC01PT1 – The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life; delivers 6,600 RPM
- XEC01PT1 – Integrated water delivery system with water flow adjustment knob continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications
- XEC01PT1 – Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the wheel is suddenly forced to stop
- XEC01PT1 – Electric brake stops the wheel in 4 seconds or less allowing for faster re-positioning
- XEC01PT1 – Built-in L.E.D. light with an independent on/off switch illuminates the cutting area for increased visibility
- XEC01PT1 – Makes single pass cuts up to a 3-1/2″ depth in various masonry and metal materials
- XEC01PT1 – Integrated overload indicator alerts of excessive battery power draw during heavy loads (batteries not included)
- XEC01PT1 – Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XEC01PT1 – Soft start suppresses start-up reaction for smoother start-ups and longer gear life
- XEC01PT1 – Protective battery compartment helps prevent dust and slurry contamination
- XAG04Z – Automatic Speed Change technology adjusts speed and torque during operation for optimum performance
- XAG04Z – Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the wheel is suddenly forced to stop
- XAG04Z – The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- E-02973 – 3D Pattern Diamond means each diamond is placed in an even 3 dimensional pattern for unparalleled performance in lifetime and speed
- E-02973 – Up to 60% more cuts per charge compared to standard blades
- E-02973 – Up to 10% faster cutting compared to standard blades
Dimensions
|
Blade Diameter (in.) |
9 in |
Product Depth (in.) |
21.75 in |
|---|---|---|---|
|
Product Height (in.) |
11 in |
Product Width (in.) |
10 in |
Details
|
Color Family |
Teal |
Condition |
New |
|---|---|---|---|
|
Construction Material |
Plastic |
Cuts Through |
Aluminum, Masonry, Metal, Steel |
|
Horsepower (HP) |
0 hp |
Included Accessories |
Blade(s),Charger |
|
Maximum Cutting Thickness (in.) |
3.5 in |
Power Tool Features |
Keyed Blade Change |
|
Returnable |
90-Day |
Saw Drive Type |
Worm Drive |
|
Start Type |
Electric |
Tool Weight (lb.) |
13.9 lb |
|
Tools Product Type |
Power Tool |
Warranty / Certifications
|
Manufacturer Warranty |
3-year limited warranty |
|---|
Reviews
There are no reviews yet.